Setup Couldnt Start Properly. Please Reboot Your Pc and Try Running Windows 10 Setup Again

Get the gear up to the 0xc0000001: A required device isn't continued or can't be accessed kick fault message affecting Windows XP, Windows Vista, Windows 7, Windows eight, Windows 8.ane andWindows ten.

Contents

• 1 About the "0xc0000001" error
  • i.one Clarification and Symptoms
    • 1.1.1 Symptom i: 0xc0000001 mistake screen on startup
  • 1.two Causes of this Fault
    • i.2.one Cause 1: SAM file is damaged
    • 1.2.2 Cause 2: Arrangement files are damaged
    • one.ii.iii Crusade 3: File system integrity compromised
    • 1.2.4 Cause iv: RAM is damaged
• 2 Fixing "0xc000000e" on Windows
  • two.one Fix #ane: Use Easy Recovery Essentials
  • ii.2 Set #2: Copy the SAM File from the Repair Folder
  • ii.three Fix #3: Run chkdsk
  • 2.4 Fix #4: Bank check RAM
  • 2.5 Ready #5: Run sfc /scannow
  • 2.vi Fix #6: Check the HDD
  • 2.seven Fix #7: Use Windows Startup Settings
• 3 More Information
  • 3.ane Linked Entries
  • 3.2 Support Links
  • 3.three Applicable Systems

Well-nigh the "0xc0000001" error

The post-obit information on this fault has been compiled past NeoSmart Technologies, based on the information gathered and reported by our global network of engineers, developers, and technicians or partner organizations.

Description and Symptoms

The error letters, alerts, warnings, and symptoms below are tied to this fault.

Symptom 1: 0xc0000001 mistake screen on startup

The 0xc0000001 error can be acquired by a wide variety of causes, with the most common ane being organisation file abuse, or damaged retentivity. Alternatively, this error can besides exist caused by a missing or damaged SAM(Security Business relationship Manager) system file.

Windows failed to get-go. A recent hardware or software change might exist the cause. To prepare the trouble:   1. Insert your Windows installation disc and restart your estimator.  2. Choose your language settings, and then click "Next."  3. Click "Repair your figurer."   If you practice not have this disc, contact your system administrator or calculator manufacturer for assistance.   Condition: 0xc0000001   Info: A required device isn't continued or can't exist accessed.

On newer organization, another error screen is displayed instead:

Windows Recovery Environment  Your PC couldn't offset properly  A required device isn't continued or can't be accessed.  Error code: 0xc0000001  You'll need to use the recovery tool on your installation media. If y'all don't have any installation media like disc or USB devices, contact your system ambassador or PC manufacturer.  Press Enter to try again Press F8 for alternate boot options

Note that the exact error message may vary from case to case, but the error code for this error is always "0xc0000001".

Alternatively, y'all may too see an error message right later on Windows loads:

Security Accounts Manager initialization failed because of the post-obit error: A device fastened to the arrangement is non functioning. Error Condition: 0xc0000001. Please click OK to shut downwardly this system and reboot into Prophylactic Manner, check event log for more detailed information.

Causes of this Error

This error has been known to occur as a result of one or more of the following:

Cause 1: SAM file is damaged

The SAM(Security Accounts Managing director) file stores the user credentials data and is essential to Windows booting process. If that file is missing or corrupt, and then the kicking process is halted.

Cause 2: System files are damaged

Sometimes, this error may occur when the key boot-related system files get damaged because of disk write mistake, power outages or virus attacks.

Cause 3: File system integrity compromised

Alternatively, this error appears when the whole file organisation gets damaged on a grander scale for the aforementioned reasons.

Crusade 4: RAM is damaged

In the worst case scenario, the PC'south memory could exist permanently damaged.

Fixing "0xc000000e" on Windows

Windows Setup CD/DVD Required!
Some of the solutions beneath require the use of the Microsoft Windows setup CD or DVD. If your PC did non come with a Windows installation disc or if you no longer accept your Windows setup media, you can use Easy Recovery Essentials for Windows instead. EasyRE will automatically find and fix many bug, and can also be used to solve this problem with the directions below.

Fix #i: Use Easy Recovery Essentials

Piece of cake Recovery Essentials can fix many errors such as this automatically using its congenital-in Automated Repair pick. EasyRE is currently available for Windows XP, Vista, vii and viii and can be downloaded and created on whatever PC.

1. Download Piece of cake Recovery Essentials. Brand sure to note your Windows version (XP, Vista, 7 or 8) before you download EasyRE. This guide can help you lot identify what version of Windows y'all have installed.
2. Fire the image. Follow these instructions on how to burn the bootable ISO image very carefully, every bit making a bootable CD tin can be tricky! Alternatively, these instructions explain how to create a bootable EasyRE recovery USB stick/bulldoze.
3. Kicking up your PC from the Easy Recovery Essentials CD or USB you lot created.
4. Once EasyRE is running, choose the "Automated Repair" pick and click Continue.

   

   Choose "Automated Repair" in Easy Recovery Essentials

5. Subsequently EasyRE scans your computer's drives, identify and select the drive letter for your Windows installation from the list, and so click on the Automatic Repair push button to brainstorm.

   

   Choose the drive associated with the Windows installation yous're trying to repair.

6. Like shooting fish in a barrel Recovery Essentials will outset analyzing the selected drive for problems. EasyRE will test for and attempt to automatically correct errors with the disk, partition, bootsector, filesystem, bootloader, and registry. No intervention is required, as EasyRE's repair is fully automated:

   

   Easy Recovery Essentials searches for errors and makes corrections to the selected Windows installation.

7. Once the procedure is consummate, EasyRE will report its findings. Click on the Restart push to reboot your PC and test the changes.
8. The "0xc0000001" fault should now exist fixed as your PC begins to load:

   

   Windows, booting up successfully.

You can download Easy Recovery Essentials from here.

Fix #2: Re-create the SAM File from the Repair Folder

If you're able to login into Windows, re-create the SAM file from C:\WINDOWS\repair to C:\WINDOWS\system32\config. To practise that, boot from a Windows Install CD, open up a command prompt, and enter:

re-create C:\Windows\Repair\Sam C:\Windows\System32\Config

If asked whether you lot desire to overwrite the original file, reply "Y"(Yeah).

This volition remove all login credentials your Windows re-create has, including username and countersign and revert dorsum to the original username that was added when yous installed Windows.

SAM file restored from a backup

Gear up #3: Run chkdsk

If the hard drive has its file integrity compromised, it is possible to apply built-in Windows CHKDSK utility to scan the disk and fix the file organization errors.

Here are the steps to run CHKDSK:

1. Boot from your Windows install disc
2. Click on Repair your co mputer after selecting proper language, fourth dimension and keyboard input.
3. Select the Windows installation drive, which is usually C:\, and click Side by side
4. Choose Command Prompt when the System Recovery Options box appears
5. Write the post-obit control and printing Enter afterwards:

   chkdsk C: /f

   Replace C: with the letter of the driver where Windows is installed.

Here is an example of what the PC'due south console output should look like once the chkdsk.exe is consummate:

Chkdsk utility results screen

Fix #iv: Check RAM

Check if you lot recently added any new RAM modules. Users take reported that a new RAM module was the actual crusade for this boot fault. Supplant the RAM modules to see if they are causing this error to appear.

Fix #5: Run sfc /scannow

On Windows Vista and Windows 7, it is possible to utilise the congenital-in Windows SFC(system file checker) tool to automatically scan a reckoner's organization files and repair them if necessary.

Here are the steps to run SFC:

1. Kick from your Windows install disc
2. Click on Repair your co mputer afterward selecting proper language, time and keyboard input.
3. Select the Windows installation bulldoze, which is unremarkably C:\, and click Next
4. Choose Command Prompt when the Organisation Recovery Options box appears
5. Write the following command and press Enter later on:

   sfc /scannow /offbootdir=D:\ /offwindir=D:\Windows\

   Replace D: with the letter of the driver where Windows is installed, and D:\Windows with the Windows folder location.

Hither is an example of what the PC's console output should look like once the sfc.exe scan is consummate and missing files are successfully restored:

Organisation files restored by the SFC utility

Ready #6: Bank check the HDD

If the fault is caused by damaged hd cables, endeavour any of the following tips to fix the error:

• Effort a different port for the SATA/IDE cables
• If you lot take more than 1 HDD, leave only the HDD with Windows installed and examination multiple SATA/IDE ports and cables

The "A disk read fault occurred" error can announced if:

• The SATA/IDE cables are damaged
• The SATA/IDE ports of your hard disks are damaged

If the HDD cables and ports are not damaged, the issue can also be from the hard disk drive itself.

To exam if your hard deejay is failing or it's already failed, use Easy Recovery Essentials' Automated Repair. Automatic Repair process volition report any problems institute with your difficult deejay or RAM retention:

1. Download Easy Recovery Essentials
2. Burn the ISO Epitome. Follow our instructions on how to burn a bootable ISO image. If y'all'd like to have a recovery USB instead, follow our instructions on how to make a recovery USB.
3. Kick into Like shooting fish in a barrel Recovery Essentials
4. Select Automated Repair
5. Click Continue and expect for the Automated Repair process to finish. Automated Repair process will report whatsoever issues institute with your hd or RAM memory:

   

To download Easy Recovery Essentials, click here.

Set up #7: Use Windows Startup Settings

1. Restart your computer
2. Printing SHIFT + F8 when booting to open the Recovery screen
3. Select the Advanced repair options
4. Go to Troubleshoot and then Advanced Options
5. Select Windows Startup Settings
6. Click Restart

Startup Settings screen

More Data

Linked Entries

• sfc
• chkdsk
• Advanced Boot Options menu on Windows viii

Back up Links

• Easy Recovery Essentials for Windows – our repair and recovery disk.

  Information technology's an easy-to-apply and automated diagnostics disk. It's available for Windows viii, Windows 7 and Windows Vista. Information technology'due south also available for Windows XP and Windows Server.

  Read more than at Windows Recovery Disks.

• The NeoSmart Support Forums, member-to-fellow member technical support and troubleshooting.
• Go a discounted toll on replacement setup and installation discs: Windows XP, Windows Vista, Windows 7, Windows eight, Windows x.

Applicative Systems

This Windows-related knowledgebase commodity applies to the following operating systems:

• Windows XP (all editions)
• Windows Vista (all editions)
• Windows seven (all editions)
• Windows 8 (all editions)
• Windows 8.1 (all editions)
• Windows 10 (all editions)

Advise an edit

hopewartn1965.blogspot.com

Source: https://neosmart.net/wiki/0xc0000001/